- Home »
- Testimonials
Testimonials
"With our Eurotech machine, we are able to run 24 hours a day, LIGHTS OUT on our products, which is an increase in production of over 25%. We were also able to cut out 8 operations on our tripod castings; and scrap factor went from 20% down to 0% on our main parts."
- Tony Bradley, Plant Manager, IPC
“As we got into this niche market a little further we found the Eurotech dual turret machine, the 420SLLY. That machine is absolutely phenomenal. A part on our other CNC machines that had a cycle time of 74 seconds we run in 60 seconds on the Eurotech.”
- Tom Hassett, Owner, T & L Automatics, Inc.
“With Eurotech, we eliminated all manual operations, sealed in better accuracy and kept our team-driven, family environment. It’s amazing; you put in a raw piece of steel and it comes out looking like a jewel with the Eurotechs.”
- -Rick Dobras, Owner, Seekonk
As seen in the American Machinist: "The Eurotech machines have simplified our processes down to a single operation and, for those jobs that were more complex, saved our cycle times by 50% and in some cases more than 50%! Because we operate with Eurotechs we are perfectly fit to do any job."
- -John Kulczuga, President, Ultimate Machining
“Our Eurotech has been a great performer for over 3 years! The machine runs great! We are incredibly pleased with the support we have been given.”
- Jim Castle, Honeywell
“We can’t say enough about the flexibility and speed of the Eurotech not to mention it that we were able to eliminate operations handling and inspections.“
- Michael Digangi – Manufacturing Mgr., Pitney Bowes
By purchasing our Eurotech machine we were able to greatly streamline our operation and have a significant gain in efficiency!
- Mike Oliver, Kennametal
“We were making the part in 360 seconds on our generic brand; with Eurotech we are making it complete in under 150 seconds with far better accuracy and throughput. The Eurotech exceeded our expectations! Eurotech's completes complex parts in one op instead of several and thus relieves the bottlenecks in our manufacturing plant.”
- Steve Thiele of Bradhart Products, Brighton, MI
We compared Eurotech to all the other top brands and with all the features Eurotech delivers it was no comparison; Eurotech far surpasses any machine out there. We now have 4 Eurotechs.
- Chirs Provini, Festo
“The Eurotech Rapido is scary fast! It is the perfect machine for parts from the 20 mm to 36 mm diameter.”
“We run the Eurotech Trofeo 24 hours per day, obtaining 20-22 hours per day uptime and the rest for tool change, quality, and set-up. We have put through $500,000.00 on an annual basis on the one machine. We conducted our own test and proved that the Eurotech is faster! We wrote our own program to test Chip to Chip time to test static, live tool index and engagement - the Eurotech was 30% faster than the competition.”
- Charlie King, Owner of IDM
“I am very impressed with the rigidity of the Eurotech machines. Turning 30mm diameter 1045 steel down to 7mm diameter in a single pass without any chatter or vibration is definitely impressive!”
“It’s out of the box automation, simple and easy to use! We run it 24/7; the quality is top-notch!”
- Justin Franklin, Kadon Precision
“After shopping the competitors I am extremely happy with my decision to purchase the Eurotech. We are amazed at the speed and accuracy it provides. The customer service before, during and after the purchase has been extraordinary!”
“Utilizing Eurotech Elite multi-axis machines is what gives us the edge to produce quality parts for many industries while providing them with the American made quality that keeps our customers coming back.”
- Joe Erickson, Jade Products
“We purchased our first 2 Eurotech machines in 1997 and they have been running daily with very little downtime. Eurotech solved our application needs and provides incredible concentricity; in fact we had a CP above 2. We have been so happy with the Eurotech machines and support that we have since added an additional 12 machines!“
- Bill Coll, Timken Bearing
“Parts went from 7 ops to 1 op., set up time was greatly reduced and often eliminated altogether. With Eurotech, we not only reduced our operations, but we inspect a complete part 1 time instead of a partial part 7 times."
- Bill Schmidt, President of Fabco-Air
“We’ve saved a lot of time on specific components. A product that formerly involved 4 processes on 3 different machines, now takes only one process on one machine because we’re using the Eurotech B1700.”
- Don Verzi, Owner of MIR Machining
“Eurotech’s ‘touch it once mentality’ have allowed us to not only complete our operations at a single machine but they have also helped with quality issues and delivering on-time. We have a 52% reduction in cycle times!”
- Mike Upham, Engineering Director of MSP Industries, LLC
“I can’t say enough about our (5) Eurotech machines! These machines are great, not to enough to mention dependable. Our relationship with the service department is bar none!“
- Les Richards - Owner, Custom Mold
“We bought the Eurotech SwissTurn machine so we can run unmanned and lights out. With the Eurotech SwissTurn Zeit 42SLY-B, the parts process runs complete, unmanned in just one operation. We’re getting huge jobs done, even when no one is physically here.”
- Mike Bellone Owner of Pioneer
“The Eurotech’s have allowed us to increase our manufacturing capacity and part quality without the need for additional personnel. We enjoy the “one and done” method of a part coming off complete from the machine. We went from 20 min cycle time to 5½ min.”
- Ron Gronback, Owner, PDQ
“Before Eurotech, our cycle time was 20 minutes and 30 minutes with handling. Eurotech took that to 6 minutes and 50 sec., handling included. That’s over 75% savings! We are making parts even faster than they quoted.”
- Troy Jones, Accratronics Seals Corp.
“With Eurotech we went from 4 operators to 1, eliminating high labor cost; our savings is huge, ROI more than we expected and the quality of our parts is unbeatable.”
“Eurotech’s Trofeo gives us one set-up and a lot more travel (4.72” of Y-axis travel). We had a 70 minute run time on a high production part and now it’s down to 6 minutes!”
- David Lee Brader of BHI
"The Eurotech multi-axis lathes can produce the precision that is required in aerospace. All of our machines' controls have been dialed in for 'super precision' with 0.000010 resolution. They have helped our company reduce steps in our machining processes while maintaining the high precision that aerospace parts require."
- Scott Livingston, CEO, Horst Eng.