"Technology that Runs Faster, Sleeps Less!"

News & Events

The Turning Revolution
Posted: February 17, 2014 in Newsletters

THE TURNING REVOLUTION

Eurotech is the Leader in Multi-Axis CNC Machining

Great Article! - Production Machining just did an article on our customer, Horst Engineering - High Mix, Low Volume Shop Redefines Throughput for Aerospace Parts. See article click here>>
 
The first Eurotech Rapido sold in North America was purchased by a company with several Swiss machines; their first comment about the machine was. “The Eurotech Rapido is scary fast! And the perfect crossover machine for swiss bar work over 11/16” diameter”. We asked them to explain further and they listed nine advantages of the Eurotech Rapido over Swiss for bar 11/16-1 ½” diameter. Read below from Dave Fricke of Lehigh Defense.
 
Video Spotlight= test the factory did for a customer. (The customer asked that we not show the part.) Simulation shown.  Watch the film. See the speed.Click here>>. Customer's part (can't show) ran on their fastest 2-turret, 2-spindle Japanese machine - cycle time 63 sec. Eurotech ran it on their Rapido, 2-1/2 times faster - cycle time 25 sec.!!
– Joe Selway, CEO

  » read more

The 9 Advantages of the Eurotech Rapido over Swiss
Posted: February 17, 2014 in Case Studies

lehigh partPrologue: The first Eurotech Rapido sold in North America was purchased by a company with several Swiss machines; their first comment about the machine was. “It’s scary fast! And the perfect crossover machine for swiss bar work over 11/16” diameter”. We asked them to explain further and they listed nine advantages of the Eurotech Rapido over Swiss for bar 11/16-1 ½” diameter.

THE 9 ADVANTAGES OF CONVENTIONAL LIVE TOOL LATHE OVER SWISS
by Dave Fricke of Lehigh Defense & Millenium Manufacturing

  » read more

The Turning Revolution
Posted: December 18, 2013 in Newsletters

THE TURNING REVOLUTION

Eurotech is the Leader in Multi-Axis CNC Machining

Note from Owner: Planning for the New Year
There was a fantastic article I read in this past months issue of Modern Machine Shop. I found it very helpful in planning for the upcoming new year and thought you might find it helpful as well. In a very visual layout they relay the 2014 capital spending survey and forecast from Garnder Research.

According to the 2014 Metalworking Capital Spending Survey By Gardner, U.S. metalworking facilities will spend $7.442 billion, an increase of almost 19% over 2013, on new metalcutting equipment next year.

See article details as follows and for the full article visit www.mmsonline.com/articles/american-manufacturing-on-the-rise

– Joe Selway, CEO
EUROTECH » read more

Take the Eurotech Speed Challenge!
Posted: November 13, 2013 in Press Releases

ROI FormBuy a machine to make the most money, not to spend the least amount of money.

T&L Automatics Reveals how they get new CNC Machines FREE every year!

"With a fast machine," explains T&L Owner Tom Hassett, "you can offset the cost and over time, get a new CNC macine for free every year." » read more

Demo Videos

Demo Videos

See the machines in action. A wide variety of complex
machining tasks performed at blisteringly fast speeds.

See the videos
Distributor Network

Distributor Network

Find a machine & parts distributor in your area, or get
information on becoming a Eurotech distributor.

View distributors

Case Studies

Read through our endless Eurotech success stories.

View More
ROI Form

ROI Form

Take the Eurotech Speed Challenge! Buy a machine to make
the most money, not to spend the least amount of money.

View the Form
Eurotech Distributor Sales and Service Tools

Eurotech Dealer Website

Distributors, access all the tools you need to sell and support Eurotech machines!

Visit the website!