"Technology that Runs Faster, Sleeps Less!"

Newsletters

The Turning Revolution
Posted: February 17, 2014 in Newsletters

THE TURNING REVOLUTION

Eurotech is the Leader in Multi-Axis CNC Machining

Great Article! - Production Machining just did an article on our customer, Horst Engineering - High Mix, Low Volume Shop Redefines Throughput for Aerospace Parts. See article click here>>
 
The first Eurotech Rapido sold in North America was purchased by a company with several Swiss machines; their first comment about the machine was. “The Eurotech Rapido is scary fast! And the perfect crossover machine for swiss bar work over 11/16” diameter”. We asked them to explain further and they listed nine advantages of the Eurotech Rapido over Swiss for bar 11/16-1 ½” diameter. Read below from Dave Fricke of Lehigh Defense.
 
Video Spotlight= test the factory did for a customer. (The customer asked that we not show the part.) Simulation shown.  Watch the film. See the speed.Click here>>. Customer's part (can't show) ran on their fastest 2-turret, 2-spindle Japanese machine - cycle time 63 sec. Eurotech ran it on their Rapido, 2-1/2 times faster - cycle time 25 sec.!!
– Joe Selway, CEO

  » read more

The Turning Revolution
Posted: December 18, 2013 in Newsletters

THE TURNING REVOLUTION

Eurotech is the Leader in Multi-Axis CNC Machining

Note from Owner: Planning for the New Year
There was a fantastic article I read in this past months issue of Modern Machine Shop. I found it very helpful in planning for the upcoming new year and thought you might find it helpful as well. In a very visual layout they relay the 2014 capital spending survey and forecast from Garnder Research.

According to the 2014 Metalworking Capital Spending Survey By Gardner, U.S. metalworking facilities will spend $7.442 billion, an increase of almost 19% over 2013, on new metalcutting equipment next year.

See article details as follows and for the full article visit www.mmsonline.com/articles/american-manufacturing-on-the-rise

– Joe Selway, CEO
EUROTECH » read more

Eurotech Newsletter
Posted: November 11, 2013 in Newsletters

THE TURNING REVOLUTION

Eurotech is the Leader in Multi-Axis CNC Machining

  • Note from Our CEO
  • Biggest Gun Show in the World
  • Take the Challenge ROI Form
  • Customer Gets New Machine FREE Every Year
  • Industry News-U.S. Factory Growth Hits Fastest Pace
  • Program Training Schedule for 2014
» read more

Eurotech Newsletter
Posted: October 14, 2013 in Newsletters

THE TURNING REVOLUTION
Eurotech is the Leader in Multi-Axis CNC Machining

  • Note from Owner: Recap of the Italy Trip
  • EMO Show Report
  • Customer Solves Outsourcing Problems
  • Industry news-Aerospace
  • Free Program Training in Chicago Next Month
» read more

Eurotech Newsletter
Posted: September 10, 2013 in Newsletters

THE TURNING REVOLUTION
Eurotech is the Leader in Multi-Axis CNC Machining

  • Note from Owner
  • Electrical Fire Burns Machine Shop - Their Rise from the Ashes
  • The Worlds Leading Metal Working Show - EMO
  • The New Technology Expected at EMO
  • Manufacturing Gains Ground as Seen in the WALL STREET JOURNAL
  • The Eurotech Factory since 1958
  • The Eurotech College and Product Support – Swiss Training Next Month
» read more

Demo Videos

Demo Videos

See the machines in action. A wide variety of complex
machining tasks performed at blisteringly fast speeds.

See the videos
Distributor Network

Distributor Network

Find a machine & parts distributor in your area, or get
information on becoming a Eurotech distributor.

View distributors
Case Studies

Case Studies

T&L Automatics Reveals How They Got New CNC Machines FREE Every Year!

View More
ROI Form

ROI Form

Take the Eurotech Speed Challenge! Buy a machine to make
the most money, not to spend the least amount of money.

View the Form
Eurotech Distributor Sales and Service Tools

Eurotech Dealer Website

Distributors, access all the tools you need to sell and support Eurotech machines!

Visit the website!